Aviation, Transportation, and Marine Coatings

 

Primers

Universal Alkyd Primer

Genteel Coatings HS Universal Modified Alkyd Primer offers 3.5 VOC, and HAPS Free. It offers quick drying times with excellent adhesion. It contains chromate-free anticorrosion for excellent protection against corrosion and can be used over solvent sensitive coatings as a base for topcoats.

 

Polyurethane Primer/ Sealer

Genteel Coatings UP-121 Primer Gray is a two component hybrid epoxy - polyurethane primer that contains rust inhibitive pigments. Used on construction equipment and transportation vehicles, it has good resistance to splash and spillage of most weak acids and alkalis, salts, most solvents, and water. This primer is used where corrosion and weather resistances are required. Genteel Coatings 121 primer mixes 4:1 with 122 part B activator. Works well as a DTM

 .

Polyurethane DTM High Build Primer

Genteel Coatings 2K DTM Primer FS-4100 is a two-component urethane primer, designed for exceptionally high build with direct-to-metal properties. 2K DTM Primer is great sanding, wet or dry after short dry times.  Genteel Coatings FS-4100 primer mixes 4:1 with FS-4111 activator. Mixed 4:1:1 FS-4100 Primer can be used as a sealer and provides minimal shrinkage and the maximum in color holdout properties.

Topcoats

 

Series 201-Alkyd Enamel

Genteel Coatings Alkyd Enamel offers a quick drying, high gloss enamel coating with excellent protection, as well as, great adhesion to properly prepared ferrous metals. It is used in industrial and commercial application for trailers, dumpsters, truck bodies and other metal equipment where a durable and fast dry coating is required.

 Series 202-Acrylic Enamel

Acrylic enamel offers excellent long term protection in exposures including mild industrial and marine environments. It has exceptional color and gloss retention with overall durability.  It provides a very high gloss with an "automotive- like" finish.

Series 301-Acrylic Urethane Enamel

Genteel Coatings 301- G3 topcoat is a two component, 3:1, aliphatic acrylic polyurethane. This acrylic urethane topcoat is designed to provide excellent UV protection and long-lasting durability for Aviation, Transportation, including Marine applications applied above the water line. 301 topcoats offer excellent abrasion and moisture resistance with exceptional gloss, distinctiveness of image and color retention. The new offers the capability to mix metallic colors. G3 uses high strength bases that produce better hiding and uses less colorants helping to low cost. All bases are made from a grind giving the distributor the ability to produce the same high quality as a factory packed color. Slightly slower drying times offer longer work times with an an extended  window for over spray to melt in. G3 is a ¾ filled gallon and pricing includes 1 full quart of activator.

 

Clears

EU-5200 European Ultra  is a 2:1 water white acrylic polyurethane clear, designed for ease of use with excellent leveling, effortless polishing and superior gloss retention. EU-5200 is designed for both complete and spot/panel jobs. EU-5200 is a supreme low cost European clear with exceptional distinctiveness of image (DOI).

 

 

FC-5400 Spot/Panel  is a two-component water white acrylic polyurethane clear, designed for fast dry times both air dry and bake.  This 4:1 clear can be polished in as fast as 2 hours air dry and 20 minutes when baked at 120°nctiveness of image (DOI) and lasting durability.

 

 

Color Documentation

A wide range color spectrum has been formulated using Genteel Coating tints and mixing bases. All colors are available in a range of gloss levels; X-Rite® Color Designer System® is also available. Factory packed colors available and subject to minimum order.